BRACELETS

Gold alloy was fashioned into plates measuring ¾”x 1/2” and is connected by two flat, evenly spaced rectangular, gold links. The bracelet is secured by a hinged, rectangular clasp. A gold alloy master link is threaded onto the clasp and the hinged upper piece snaps closed to lock the master link in place. The clasp may be opened by applying finger pressure to the short end of the rectangular clasp. Each plate has a brilliant, round, faceted diamond mounted into the center. Around each diamond is engraved a diamond shape that is filled with sparkling diamond enamel. Around the edge of each plate and framing each diamond is engraved two sets of scrollwork, stylized initials that repeat. One set is “GS” and the other is “DS”. This border is filled with sparkling diamond enamel to bring the border into clear view.

Emerald and Gold Anklet (Cost: 56G)

Gold alloy was fashioned into plates measuring ¾”x 1/2” and is connected by two flat, evenly spaced rectangular, gold links. The bracelet is secured by a hinged, rectangular clasp. A gold alloy master link is threaded onto the clasp and the hinged upper piece snaps closed to lock the master link in place. The clasp may be opened by applying finger pressure to the short end of the rectangular clasp. Each plate has round, faceted emerald onto the center. Engraved around the emerald are curled rays filled with emerald green enamel that create a sun. Around the edge of each plate and framing each emerald sun is engraved two sets of scrollwork, stylized initials that repeat. One set is “GS” and the other is “DS”. This border is filled with emerald green enamel to bring the border into clear view.

Fire Opal Charm Anklet (Cost: 24G)

Gold was molded into bells with tiny clappers and spaced on a gold chain to form an ankle bracelet. Between the bells are spaced small, orange charms in the shape of a tongue of flame carved in fire opal. Each bell and tongue of flame are suspended by a gold master link. The anklet is secured by a hinged, rectangular clasp. A gold alloy master link is threaded onto the clasp and the hinged upper piece snaps closed to lock the master link in place. The clasp may be opened by applying finger pressure to the short end of the rectangular clasp.

Fire Opal and Gold Anklet (Cost: 19G)

Gold alloy was fashioned into plates measuring ¾”x 1/2” and is connected by two flat, evenly spaced rectangular, gold links. The bracelet is secured by a hinged, rectangular clasp. A gold alloy master link is threaded onto the clasp and the hinged upper piece snaps closed to lock the master link in place. The clasp may be opened by applying finger pressure to the short end of the rectangular clasp. Each plate has an oval orange fire opal mounted into the center. Around the edge of each plate and framing each opal oval is engraved two sets of scrollwork, stylized initials that repeat. One set is “GS” and the other is “DS”. This border is filled with orange fire opal enamel to bring the border into clear view.

Ruby Dagger Anklet (Cost: 78G)

Gold alloy was fashioned into plates measuring ¾”x 1/2” and is connected by two flat, evenly spaced rectangular, gold links. The anklet is secured by a hinged, rectangular clasp. A gold alloy master link is threaded onto the clasp and the hinged upper piece snaps closed to lock the master link in place. The clasp may be opened by applying finger pressure to the short end of the rectangular clasp. Each plate has a carved dagger of blood red ruby mounted into the center. Around the dagger on each plate and framing each one is engraved straight bars of inverted facets. The inverted facets are filled with blood red enamel to bring the frame into clear relief. On the back of one plate is engraved, “With Love from opalfire.”

Sapphire and Gold Anklet (Cost: 56G)

Gold alloy was fashioned into plates measuring ¾”x 1/2” and is connected by two flat, evenly spaced rectangular, gold links. The bracelet is secured by a hinged, rectangular clasp. A gold alloy master link is threaded onto the clasp and the hinged upper piece snaps closed to lock the master link in place. The clasp may be opened by applying finger pressure to the short end of the rectangular clasp. Each plate has a rich, blue sapphire carved into a triangle. Each triangle has a tiny tem wood tree carved within. Around the edge of each plate and framing each sapphire triangle is engraved two sets of scrollwork, stylized initials that repeat. One set is “GS” and the other is “DS”. This border is filled with sapphire blue enamel to bring the border into clear view.

Sapphire and Silver Anklet (Cost: 30G)

Silver alloy was fashioned into plates measuring ¾”x 1/2” and is connected by two flat, evenly spaced rectangular, silver links. The bracelet is secured by a hinged, rectangular clasp. A silver alloy master link is threaded onto the clasp and the hinged upper piece snaps closed to lock the master link in place. The clasp may be opened by applying finger pressure to the short end of the rectangular clasp. Each plate has four sides of a sapphire octahedron mounted onto the center. Around the edge of each plate and framing each sapphire half-octahedron is engraved two sets of scrollwork, stylized initials that repeat. One set is “GS” and the other is “DS”. This border is filled with sapphire blue enamel to bring the border into clear view.

Topaz and Gold Anklet (Cost: 27G)

Gold alloy was fashioned into plates measuring ¾”x 1/2” and is connected by two flat, evenly spaced rectangular, gold links. The bracelet is secured by a hinged, rectangular clasp. A gold alloy master link is threaded onto the clasp and the hinged upper piece snaps closed to lock the master link in place. The clasp may be opened by applying finger pressure to the short end of the rectangular clasp. Each plate has a rich golden topaz cut into a faceted five-point star mounted into the center. Around the edge of each plate and framing each topaz star is engraved two sets of scrollwork, stylized initials that repeat. One set is “GS” and the other is “DS”. This border is filled with black onyx enamel to bring the border into clear view.

Fire Opal Spiral Armband (Cost: 27G)

Gold was molded into tubing that curls around three times in a spiral that fits the upper arm of a girl. The two ends of the armband are capped by round, gold knobs. Inset into the tubing are tiny tongues of flame carved in orange fire opal. The tubing has long, etched lines that indicate heat or smoke and the lines were brushed with golden brown antique finishing.

Opal Armband (Cost: 5S)

Silver alloy was forged into a flat band that fits over a girl’s upper arm. An oval opal was inset into the middle of the band. Engraved along the upper and lower edges of the band are borders of tongues of flame. Sailing through the middle and to either side of the oval is engraved small Raider ships afloat stylized waves. All engraving is filled with black onyx enamel to bring it into clear view.

Opal/White Gold Band Bracelet (Cost: 27G)

White gold was forged into flat banding to create a band bracelet 1-1/2” wide. A single opal was mounted onto the cuff at front center. Square Greek border was engraved at the upper and lower edges of the band and filled with glittering diamond enamel to emphasize the border into clear view. Quantity of 10.

Sapphire and Onyx Axe Armband (Cost: 90G)

Formed of durable silver alloy, each armband is 3” in width and spans the width of a man’s upper arm. Inset in the center of the armband is an axe measuring ½” x1”, including the handle. The blade is fashioned from sapphire with an outward curve at upper and lower blade edges. The handle is carved from black onyx with one end inset into the axe head before mounting to the armband. Round, faceted sapphires and black onyx in alternating order line each edge of an armband. Quantity of two.

Garnet Heart Bracelet (Cost: 80G)

Gold alloy was blended with just enough coloring to give it a light, warm red tinge. Each plate measures ¾”x 1/2” and is connected by two flat, evenly spaced rectangular, red-gold links. The bracelet is secured by a hinged, rectangular clasp. A gold alloy master link is threaded onto the clasp and the hinged upper piece snaps closed to lock the master link in place. The clasp may be opened by applying finger pressure to the short end of the rectangular clasp. Each plate has a carved garnet heart mounted onto the center. Around the edge of each plate and framing each garnet heart is engraved a square Greek border with black enamel filling the lines to bring the border into clear view.

Ruby Flaminium Bracelet (Cost: 30G)

Gold alloy was blended with just enough coloring to give it a light, warm red tinge. Each plate measures ¾”x 1/2” and is connected by two flat, evenly spaced rectangular, red-gold links. The bracelet is secured by a hinged, rectangular clasp. A gold alloy master link is threaded onto the clasp and the hinged upper piece snaps closed to lock the master link in place. The clasp may be opened by applying finger pressure to the short end of the rectangular clasp. Each plate has a ½ carat, round, faceted, blood ruby inset in the center. Five petals of the flaminium blossom are engraved around the ruby. The engraved lines are filled with black enamel to bring the petals into clear relief. Around the edge of each plate and framing each ruby flaminium is engraved an ivy vine with black enamel filling the lines to bring the vine into clear view.

Silver Panther Charm Bracelet (Cost: 2G)

A silver link bracelet was fashioned with a secure clasp to prevent loss. Regularly spaced and attached to the bracelet by master links are small, silver panthers painted in black obsidian enamel. Each panther has slanted silver eyes. The movement of the small metal panther charms causes a soft, musical clink.