NECKLACES

The pendant measures 1”x2”, including the inset handle. The blade was fashioned from silver with a wicked outward curve at upper and lower blade edges. The word “Axeslayer” was engraved in vertical letters at the unsharpened edge on both sides of the axe head and filled with sapphire blue enamel to bring the letters into clear view. The 1/8” diameter handle was carved from black onyx with one end inset into the axe head. A loop of delicate silver chain creates a tiny hand loop. A heavy-duty pin assembly was mounted behind that allows use as a pendant or pin. The neck chain was smelted of smooth silver links with a small clip that attaches to a small ring at the back of the pendant and above the pin assembly.

Heart/Sword Pendant A (Cost: 10G)

A heart, 1” x 1”, was fashioned of gold. A sword of emerald was inset in horizontal across the heart. The sword was cut with faceted edges to catch the light. A small, faceted, blood red, ruby heart is inset into the center of the heart/sword. A chain was fashioned of tiny gold, emerald, and blood ruby hearts. The chain is secured by a gold hinged, rectangular clasp. A gold master link is threaded onto the clasp and the hinged upper piece snaps closed to lock the master link in place. The clasp may be opened by applying finger pressure to the short end of the rectangular clasp.

Heart/Sword Pendant B (Cost: 12G)

A heart, 1”x1”, was fashioned of gold. A sword of silver was inset in horizontal across the heart. A small, faceted, blood red, ruby heart is inset into the center of the heart/sword. A chain was fashioned of tiny gold, silver, and blood ruby hearts. The chain is secured by a hinged, rectangular clasp. A silver master link is threaded onto the clasp and the hinged upper piece snaps closed to lock the master link in place. The clasp may be opened by applying finger pressure to the short end of the rectangular clasp.

Opal/Gold Scallop Necklace (Cost: 15G)

Fashioned of gold alloy, plates were crafted in a scalloped shape, the three, rounded edges spread at the bottom of each plate and a simple, graceful curve at the top. The scallop plates are molded to show veins, as in flower petals and were antiqued with black to enhance the delicate lines. Each scallop plate is connected with others by round, gold alloy master links. There are two strands of scallop plates, one above the other, with a fire opal, 2 cm x 1.5 cm, set into a larger scallop plate in the center of each strand. The necklace is secured by a hinged, rectangular clasp. A gold alloy master link is threaded onto the clasp and the hinged upper piece snaps closed to lock the master link in place. The clasp may be opened by applying finger pressure to the short end of the rectangular clasp. The master link side of the clasp has a 2” length of gold alloy master links to allow for adjustment for comfort.

Opal/White Gold Necklace (Cost: 16G)

White gold alloy was forged into a flat band and shaped into a keyhole shape with the wide part of the key large enough to slide over the head. On the slim end, the tab has an opal inset in its center, the tab end resting flat against the chest. There is enough curve in the piece to allow for the natural contour of the neck and chest. Luxuriant engraved ivy vine crawls its way around the piece, encircling the opal. The engraving is filled with glittering diamond enamel to emphasize the vine. Quantity of 10.

Opal Heart Necklace (Cost: 42G)

Yellow gold was molded into a heart shape with two smooth, curved prongs extending from the upper curves of the heart, curving to fit around the neck. It is 6” across the upper curves of the heart and the curves are molded in relief to clearly show the heart shape. An oval Schendi opal ½” long is inset into the middle of the heart. Inset around the edge of the heart, there is a row of small, round, faceted rubies. Evenly spaced between the ruby row and the sapphire row is a row of small, round, faceted diamonds following the heart shape. Between the diamond row and the central opal is a row of small, round, faceted sapphires following the heart shape and framing the central opal in a blue gem heart.

Opal Leather Necklace (Cost: 22G)

Three strands of soft leather in a specific length were braided into a spiral pattern ending in a Schendi opal pendant. 2” of length on the strands was left to dangle as fringe from halfway down to the tip of the necklace. The oval, emerald-toned, Schendi opal was securely braided into a pendant to frame it, allowing its beauty to shine forth unimpeded.

Sapphire Oval Pendant (Cost: 1G)

The provided sapphire was recut to eliminate a small flaw, leaving the overall size only slightly smaller than the original. The small sapphire was then carefully carved into an oval, then faceted over its entire surface to maximize light reflection and intensify interior fire. A silver filigree cap with a master link was fashioned and set onto the top of the sapphire pendant. Delicate silver filigree chain was crafted in the same filigree style as the filigree cap.

Pink Sapphire Heart Necklace (Cost: 57G)

Silver alloy was smelted with enough ground ruby to give it a pink tint to match the pink sapphires. A pendant of pink silver was crafted in the shape of a heart. In the center is set a 15mm, round, faceted cut, pink sapphire. Outlining the central gem are small, round, faceted cut, pink sapphires that follow the curve of the heart. The chain links attached at each side of the upper curve of the heart pendant are shaped into tiny hearts in pink silver and linked with each other to form lengths of interconnected hearts. The necklace is secured by a hinged, rectangular clasp. A pink silver alloy master link is threaded onto the clasp and the hinged upper piece snaps closed to lock the master link in place. The clasp may be opened by applying finger pressure to the short end of the rectangular clasp.

Sapphire Teardrop Pendant (Cost: 3G)

A provided sapphire was recut into a teardrop shape and faceted over its entire surface. The faceting enhances the outer reflective and inner refractive qualities of the gem and gives it the ability to catch light and flash it in brilliant blue hues. A filigree cap in Moorish scroll work pattern and master link were crafted for the teardrop sapphire to be suspended from. Delicate, silver, Moorish scroll work pattern, filigree chain was smelted to match the filigree cap of the teardrop. For the chain, a silver alloy master link is threaded onto the clasp and the hinged upper piece snaps closed to lock the master link in place. The clasp may be opened by applying finger pressure to the short end of the rectangular clasp.

Tiger’s Eye Torque (Cost: 3S)

Tiger’s eye was carved into a smooth, rounded rope that curves around and fits the neck. There is just enough open space in front to allow the torque to be placed about the neck. The two ends have been capped with molded lion’s heads in gold. The lions are growling with menace. Their eyes are tiny, faceted, almond-shaped, amber gold topazes.

Wolf Torque (Cost: 18G)

White gold was forged into a smooth, rounded rope that curves around and fits the neck. There is just enough open space in front to allow the torque to be placed about the neck. The two ends have been capped with molded wolves’ heads in white gold and brushed with black antiquing to produce a soft sheen. The wolves are growling with menace. Their eyes are tiny, smooth, almond-shaped, gray cat’s eyes.